6. Install the fender splash shields (right-hand side shown).
7. Install the left-hand front wheel.
Vehicles with manual transaxle
8. NOTE: The fill level is 0-5 mm below the lower edge of the filler hole.
Check the transmission fluid level and fill with Merkur manual transmission fluid. For additional information, refer to Section 308-03.
All Vehicles
9. Lower the vehicle, tighten the left-hand front wheel nuts (right-hand side shown).
1. Wheel nuts
2. Hub nut
10. Tighten the left-hand suspension strut locknut (right-hand side shown).
Use an Allen key as back-stop.
Tighten finger-tight using ring spanner.
Tighten to torque specification using torque wrench.
Vehicles with automatic transaxle
11. Fill the automatic transaxle with MERCON Multi-purpose automatic transmission fluid. For additional information, refer to Section 307-01.
1999 Contour/Mystique Workshop Manual
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSXP/~MUS~LEN/20/