Adjusting Automatic Transmission Fluid Levels
Note: Use of a non-approved automatic transmission fluid may cause
internal transmission component damage.
Note: An overfill condition of transmission fluid may cause shift and/or
engagement concerns and/or possible damage.
Note: Do not use supplemental transmission fluid additives, treatments
or cleaning agents. The use of these materials may affect transmission
operation and result in damage to internal transmission components.
Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick. Refer to the Tec h n i c a l
Specifications table in the Capacities and Specifications chapter.
If necessary, add fluid in 1/2 pint (250 ml) inc rements throu gh the filler
tube until the level is correct.
212 Maintenance
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
To Next Page
Loading...
