Item Capacity
Ford part name or
equivalent
Ford part number / Ford
specification
A/C Refrigerant
9
Without auxiliary
A/C: 1.87 pounds
(0.517kg). With
auxiliary A/C:
3.37 pounds
(1.53kg)
Motorcraft R–134a
Refrigerant
YN-19 (US),
CYN-16–R (Canada)
WSH-M17B19–A
A/C Refrigerant Compressor Oil
9
Without auxiliary
A/C: 8 ounces
(236.6ml), With
auxiliary A/C:
10 ounces
(295.7ml)
Motorcraft PAG
Refrigerant Compressor
Oil
YN-12–D
WSH-M1C231–B
1
Add the coolant type originally equipped in your vehicle.
2
Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford
specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets
API SN requirements and displays the API Certification Mark for gasoline engines.
Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead
to engine damage that is not covered by your Ford warranty.
3
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size, if
equipped with an in-tank cooler, if equipped with an oil to air cooler and if equipped with a remote
filter assembly. The amount of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4
Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to
scheduled maintenance information to determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.
5
Dana limited-slip axle (M60) requires 6 fl oz. (177 ml) of Additive Friction Modifier XL-3 or
equivalent meeting Ford specification EST-M2C118-A.
Capacities and Specifications 283
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
To Next Page
Loading...
