When you believe your system is not operating properly
The main function of the tire pressure monitoring system is to warn you
when your tires need air. It can also warn you in the event the system is
no longer capable of functioning as intended. See the following chart for
information concerning your tire pressure monitoring system:
Low tire pressure
warning light
Possible cause Customer action required
Solid warning light Tire(s)
under-inflated
1. Make sure tires are at the
proper pressure. See Inflating
your tires in this chapter.
2. After inflating your tires to
the manufacturer’s
recommended pressure as
shown on the Tire Label
(located on the edge of driver’s
door or the B-Pillar), the
vehicle must be driven for at
least two minutes over 20 mph
(32 km/h) before the light
turns off.
Spare tire in use Repair the damaged road wheel
and tire asssembly and reinstall
it on the vehicle to restore
system function. For a
description on how the system
functions, see When your
temporary spare tire is
installed in this section.
TPMS
malfunction
If the tires are properly inflated
and the spare tire is not in use
but the light remains on,
contact your authorized dealer
as soon as possible.
Tire rotation
without sensor
training
On vehicles with different front
and rear tire pressures, the tire
pressure monitoring system
must be retrained following
every tire rotation. See Tire
rotation in this chapter.
228 Wheels and Tires
2015 Econoline (eco)
Owners Guide gf, 2nd Printing, December 2014
USA (fus)
To Next Page
Loading...
