Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE WIPER
BLADES
Windshield Wiper Blades
Note: The windshield wiper blades are
different in length. If you install wiper blades
of the wrong length, the rain sensor may not
work correctly.
Changing the Windshield Wiper Blades
1. Lift the wiper arm up to its service
position (close to a 90 degree angle).
2. Firmly hold the wiper arm tip with one
hand and disassemble the old wiper
blade with your other hand.
3. To remove the wiper blade, press the
plastic adaptor (1) and pull (2) the
wiper blade.
1. To assemble the wiper blade, slide (3)
the new blade onto the wiper arm until
you here a snap (4).
2. Lower the wiper arm back to it's
working position.
Changing the Rear Window Wiper
Blade
1. Lift the wiper arm up to its service
position (close to a 90 degree angle).
2. Firmly hold the wiper arm tip with one
hand and disassemble the old wiper
blade with your other hand.
123
Ecosport (CBY) Rayong (Thailand)/Haiduong (Vietnam), enPHI
Maintenance