1. Position the visor in the down position.
2. When removing the vanity lamp, be
careful not to damage the roof trim.
Using appropriate plastic spatula,
insert it between the vanity mirror and
the roof trim and release the metal
retaining clip.
3. Remove the lamp.
4. Remove the bulb.
Front Fog Lamps
Note: Do not separate the fog lamp bulb
from the bulb holder
Note: .
1. Disconnect the electrical connector.
2. Turn the bulb holder anti-clockwise.
3. Remove the fog lamp bulb and holder
assembly.
4. Connect the electrical connector.
5. Install a new fog lamp assembly.
126
Ecosport (CBY) Rayong (Thailand)/Haiduong (Vietnam), enPHI
Maintenance
To Next Page
Loading...
