Note: For vehicles without an information
display, see an authorized dealer.
Note: You must switch the ignition on when
switching on or off the park lock control.
To use this feature, carry out the following
steps within 30 seconds after you switch
the ignition off and before the driver's door
is opened.
1. Select park and switch off the vehicle.
2. Remove the key.
3. Press and hold the brake pedal.
4. Select neutral.
Note: Opening the driver's door or 30
seconds after you switch the ignition off will
deactivate the park lock control, until the
next ignition cycle.
90
Ecosport (CBY) Rayong (Thailand)/Haiduong (Vietnam), enPHI
Transmission
To Next Page
Loading...
