3. To remove the wiper blade, press the
plastic adaptor (1) and pull (2) the
wiper blade.
1. To assemble the wiper blade, slide (3)
the new blade onto the wiper arm until
you here a snap (4).
2. Lower the wiper arm back to it's
working position.
REMOVING A HEADLAMP
1. Open the hood. See Opening and
Closing the Hood (page 128).
2. Remove the screws and push pins.
3. Lift the outer side of the headlamp to
disengage it from the lower fixing point.
4. Pull the headlamp as far as possible
toward the center of your vehicle and
remove.
5. Disconnect the two electrical
connectors.
137
EcoSport (CBY) Haiduong (Vietnam)/Rayong (Thailand), DN15-19A321-GC enPHI
Maintenance