Lowering the Head Restraints
Press the locking button and push the head
restraint downward. Make sure the head
restraint locks into place.
Removing the Head Restraints
Front Head Restraints
Press locking button 1 and at the same
time release the retaining clip 2 using a
suitable implement.
Rear Outermost Head Restraints
Pull to move the head restraint upward.
Press the locking button 1 to lower the
head restraint or to remove the head
restraint.
Installing the Head Restraints
Align the stems with the guide sleeves and
push the head restraint downward. Make
sure the head restraint locks into place.
MANUAL SEATS
WARNINGS
Do not place any objects behind the
seat back before returning it to the
original position. Pull on the seat
back to make sure that it has fully latched
after returning the seat back to its original
position. An unlatched seat may become
dangerous if you stop suddenly or have a
collision.
Rock the seat backward and forward
after releasing the lever to make sure
that it is fully engaged in its catch.
Moving the Seat Backward and
Forward
To Next Page
Loading...
