2. Remove the luggage rack (if equipped).
1. Remove the luggage rack mounting screws (10 required).
3. Remove the headliner. For additional information, refer to Section 501-05 .
4. Remove the roof opening panel (if equipped). For additional information, refer to Section 501-17 .
5. Remove the roof ditch mouldings.
6. NOTE: For installation purpose, particular attention must be paid to the depth (thickness) of the sealer
removed.
Using a heat gun and a narrow scraper, remove the sealant along the entire length of the roof sides.
Remove sealer as completely as possible.
To Next Page
Loading...
