Note: The brakes may emit noise when
applied by the system.
Setting the Gap Distance
Note: The gap setting is time dependent
and therefore the distance automatically
adjusts with your speed.
Note: It is your responsibility to select a gap
appropriate to the driving conditions.
You can decrease or increase the distance
between your vehicle and the vehicle in
front by pressing the gap control.
The selected gap appears in the
information display as shown by the bars
in the image. You can select four gap
settings.
144
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
Cruise Control