Ford ESCAPE 2014 - Phone Settings

To pair a subsequent cell phone, select:
Action and DescriptionMessage
Add device
Follow the on-screen instructions.Find SYNC
Make sure that Bluetooth is set to On and that your cell phone
is in the correct mode. See your cell phone’s manual if
necessary.
Select SYNC and a six-digit PIN appears on your device.
If you are prompted to enter a PIN on your device, it does not
support Secure Simple Pairing. To pair, enter the PIN
displayed on the touchscreen. Skip the next step.
When prompted on your cell phone’s display, confirm that
the PIN provided by SYNC matches the PIN displayed on your
cell phone.
The display indicates when the pairing is successful.
SYNC may prompt you with more cell phone options. For
more information on your cell phone's capability, see your
cell phone's manual and visit the website.
Making Calls
E142599
Press the voice button and when
prompted say:
Voice command
Call <name>
dial [[a] number]
To end the call, touch the End
button on the screen.
Note: You can also end the call or exit
phone mode by pressing and holding the
phone button on the steering wheel.
Redialling
Press the phone button on the
steering wheel. A message will
display on the screen showing
the last dialled phone number.
To redial, select:
Message
Redial
Note: You can press the phone button on
the steering wheel twice in a row to
immediately dial the last number.
Receiving Calls
During an incoming call, an
audible tone sounds. Call
information appears in the
display if it is available.
261
Escape/Kuga (CBS) Australia, Vehicles Built From: 08-09-2014, TF 19A321 AD enAUS
SYNC™ 2