Ford Escape 2018 - Page 9

8
9
Using SYNC 3
The SYNC 3 system allows you to interact with a
variety of features using the touchscreen and voice
commands. By integrating with your Bluetooth enabled
phone, the touchscreen provides easy interaction with
audio, multimedia, navigation, and your phone’s SYNC 3
compatible apps.
Pairing Your Phone with SYNC 3
Pair your Bluetooth enabled phone with the system before
using the functions in hands-free mode. Switch on Bluetooth
on your device to begin pairing. See your phone’s manual
if necessary.
1. Select Add Phone.
2. Follow the on-screen instructions.
3. A prompt alerts you to search for the system on your phone.
4. Select your vehicle’s make and model as it displays on
your phone.
5. Confirm that the six-digit number appearing on your phone
matches the six-digit number on the touchscreen.
6. The touchscreen indicates when the pairing is successful.
7. Your phone may prompt you to give the system permission
to access information. To check your phone’s compatibility,
see your phone’s manual or visit the website.
*if equipped
Get in Touch Using Your Touchscreen
Use the feature bar at the bottom of the touchscreen to access the many features of SYNC 3.
Phone
Aer pairing your phone, you can access
more phone-dependent features:
• Recent call lists.
• Contacts: Sort alphabetically and
choose a specific letter to begin
viewing your entries.
• Phone settings: Pair another phone,
and set ring tones and alerts.
• Text messages.
• Do not disturb: Send all calls to your
voicemail, and all ring tones and alerts
are set to silent mode.
Note: Refer to the SYNC 3 chapter of your
Owner’s Manual, owner.ford.com (U.S.)
or syncmyride.ca (Canada) for details.
Navigation*
Select one of two ways to find
your destination:
• Destination mode lets you key in a
specific address or use a variety of
search methods to locate where you
want to go.
• Map mode shows advanced viewing
of 2D city maps, 3D landmarks and 3D
city models (when available).
Refer to the SYNC 3 chapter in your
Owner’s Manual for complete details.
Set a Destination
Press Destination on your touchscreen
and then press Search. Enter a street
address, intersection, city or a Point Of
Interest (POI).
Aer you choose your destination,
press Start. The system uses a variety of
screens and visible prompts to guide you
to your destination.
During your route, you can press the
maneuver arrow icon on the map if you
want the system to repeat the previous
route guidance instructions.
The navigation map shows your
estimated time of arrival, remaining
travel time or the distance to
your destination.
Navigation Menu
When you are on your route, you
can change your touchscreen view.
To change the view, touch Menu on
the bottom of the screen and then
select Screen View to choose from
any of the following:
• Full Map.
• Highway Exit Info displays on the
right side of the touchscreen. View
POI icons (restaurants, ATMs, etc.)
as they pertain to each exit. You can
select a POI as a waypoint.
• Turn List shows all of the available
turns on your current route.
SYNC 3
®
*
*if equipped