WARNING
Use only the specified jacking points.
If you use other positions, you may
damage the body, steering,
suspension, engine, braking system or the
fuel lines.
Removing a Road Wheel
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
Make sure that the wheels are
pointing straight ahead.
If your vehicle has a manual
transmission, move the selector lever
to first or reverse gear. If it has an
automatic transmission, move the selector
lever to position (P).
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
WARNINGS
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
Never place anything between the
vehicle jack and your vehicle.
Note: Do not lay alloy road wheels face
down on the ground.
1. Assemble the wheel brace and winch
extension tool.
2. Insert the assembled wheel brace and
winch extension tool into the vehicle
jack and raise your vehicle until the tire
is clear of the ground.
258
Everest (TEC), EB3B-19G219-YAA enAUS
Wheels and Tires
To Next Page
Loading...
