Action and DescriptionMenu Item
Check or uncheck this option to turn the Bluetooth interface
of the system on or off. Select this option then press the OK
button to change the option's status.
Bluetooth on
This selection does not erase your indexed information
(phonebook, call history, text messages and paired devices).
Set defaults
Select this option and confirm when prompted in the audio
display. Return to the factory default settings.
Completely erase all information stored on the system
(phonebook, call history, text messages and paired devices)
and return to the factory default settings.
Master reset
Select this option and confirm when prompted in the audio
display. The display indicates when complete and the system
takes you back to the previous menu.
Install applications or software updates you have down-
loaded.
Install on SYNC
Select this option and confirm when prompted in the audio
display. There must be a valid SYNC application or update
available on the USB thumb drive in order to finish an
installation successfully.
Display the system's version numbers as well as its serial
number.
System info
Press the OK button to select.
The voice settings submenu contains various options. See
Using Voice Recognition (page 288).
Voice settings
Browse the actual menu structure of the connected USB
device. Press the OK button and use the up or down arrows
to scroll through the folders and files. Use the left or right
arrows to enter and leave a folder. Media content can be
directly selected for playback from this menu.
Browse USB
USING SYNC™ WITH YOUR
PHONE
Pairing a Cell Phone For the First
Time
Note: You must switch the ignition and
radio on.
1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your cell
phone's manual if necessary.
2. Press the PHONE button. When the
audio display indicates that no phones
are paired, select the option to add.
302
Everest (TEC), EB3B-19G219-YAA enAUS
SYNC™
To Next Page
Loading...
