ActionMessage
Displays when the engine has reduced power in order to help
reduce high coolant temperatures.
Power Reduced to Low
er Engine Temp
Displays to indicate that the vehicle is still in Transport or
Factory mode. This may not allow some features to operate
properly. See your authorized dealer.
Transport / Factory
Mode
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
See Manual
Park Aid
ActionMessage
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Front
Parking Aid (page 150).
Check Front Park Aid
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Rear
Parking Aid (page 149).
Check Rear Park Aid
Displays the park aid status.Front Park Aid On Off
Displays the park aid status.Rear Park Aid On Off
Park Brake
ActionMessage
Displays when the parking brake is set, the engine is running
and the vehicle is driven more than 3 mph (5 km/h). If the
warning stays on after the parking brake is released, contact
your authorized dealer.
Park Brake Engaged
The electric parking brake system has detected a condition
that requires service. See your authorized dealer.
Park Brake Malfunction
Service Now
Displays when the electric parking brake is not set.Park Brake Not Applied
Apply Park Brake
Displays when the electric parking brake is running a diagnostic
check.
Park Brake Maintenance
Mode
Displays when the electric parking brake is set but has not be
released.
Park Brake Use Switch
to Release
89
Everest (TEC), EB3B-19G219-YAA enAUS
Information Displays
To Next Page
Loading...
