Press the button.
The vehicle speed returns to the previously
set speed and gap setting. The set speed
displays continuously in the information
display when the system is active.
Note: Only use resume if you are aware of
the set speed and intend to return to it.
Resuming the Set Speed from a
Complete Stop (If Equipped)
If your vehicle follows a vehicle to a
complete stop and remains stationary for
less than a few seconds, your vehicle
accelerates from a stationary position to
follow the vehicle ahead.
If your vehicle follows a vehicle to a
complete stop and remains stationary for
more than a few seconds, an indicator and
message displays.
ActionMessage
Cruise control does not resume automatic-
ally when this display is active.
Stopped
If the lead vehicle begins to move, you are
prompted to press the resume button.
Press button to resume
Press and release the button or use the
accelerator pedal to resume following the
lead vehicle.
Displays when on a limited access highway
after following a vehicle to a complete stop.
In this situation, your vehicle resumes
following the lead vehicle without a button
press or pressing the accelerator pedal. The
system can remain in auto-resume state
for approximately 30 seconds, after which
it no longer automatically resumes.
Auto-Resume
271
2022 Expedition (TB8) Canada/United States of America, enUSA, Edition date: 202109, First-Printing
Adaptive Cruise Control (If Equipped)
To Next Page
Loading...
