Keep Out Zone
The keep out zone is represented by the
yellow dotted lines running parallel to your
vehicle.
360 DEGREE CAMERA
SETTINGS
SWITCHING THE 360 DEGREE
CAMERA ON AND OFF
The 360 degree camera system
button is located near the
touchscreen and allows you to
toggle the front camera on or off. The front
and rear cameras have multiple screens
which consist of:
• Normal view.
• Normal view with 360.
• Split view.
Note: The rear view camera activates when
you switch into reverse (R). Additional views
are then accessible on the touchscreen.
When in park (P), neutral (N) or drive (D),
only the front views display when you press
the camera button. When in reverse (R), only
the rear views display when you press the
button.
Note: The front camera views remain on when
your vehicle is in motion at low speed. The rear
camera views remain on at all speeds when
in reverse (R). Some rear camera views are
available in neutral (N) and in drive (D) at all
speeds.
SWITCHING THE 360 DEGREE
CAMERA VIEW
Front normal view provides a view
of what is directly in front of your
vehicle.
Front split view provides a
wide-angle view of what is in front
of your vehicle.
Normal + 360 degree view
contains the normal camera view
next to a 360 degree camera view.
Rear normal view provides a view
of what is directly behind your
vehicle. The rear normal view is
available at all speeds in reverse (R ), drive
(D), and neutral (N). When not in reverse (R),
this view may display with differentiating text
or graphics.
253
Expedition (TBD) Canada/Mexico/United States of America, enUSA, Edition date: 202406, DOM
360 Degree Camera
To Next Page
Loading...
