D Drive Not shown on the display.
Activate by pressing the
transmission control switch.
O/D
OFF
will illuminate in the
instrument cluster. Transmission
operates in gears one through four.
D (Drive) provides more engine
braking than
D
(Overdrive) and
is useful when towing a trailer or
heavy loads through heavy terrain.
To return to
D
(Overdrive)
mode, press the transmission
control switch.
O/D
OFF
will turn off.
When starting your vehicle, the
transmission will automatically
return to normal
D
(Overdrive)
mode.
2 Second Use the 2 (Second)
position to start-up on slippery
roads or to provide additional
braking on downgrades.
Transmission operates in third
gear.
1 Low Use the 1 (Low) position to
provide maximum engine braking
on steep downgrades. Upshifts may
be made by shifting to the 2
(Second) position or to
D
(Overdrive). Selecting the 1
(Low) position at high speeds
causes the transmission to
downshift through the gears and
will shift to 1 (Low) after the
vehicle decelerates to the proper
speed.
uno_driving_manual_trans
Driving
124
To Next Page
Loading...
