During normal operation, the fluid
level in the clutch fluid reservoir
will slowly rise. If the fluid level
drops, maintain the fluid level at
the reservoir indicator.
Use only DOT 3 brake fluid
designed to meet Ford
specifications. Refer to the
Capacities and specifications
chapter.
1. Clean the reservoir cap before
removal to prevent contaminants
from entering the reservoir.
2. Remove the cap.
3. Add fluid until the level reaches
the FULL line.
CHECKING AND ADDING
WASHER FLUID
Important information about
washer fluid
In freezing weather (temperatures
below 0°C [32°F]), washer fluid
containing a small amount of
antifreeze is to be used. State or
local regulations on volatile organic
compounds may restrict the use of
methanol, a common antifreeze
additive. Use a non-methanol
antifreeze in freezing weather only
if the fluid does not damage the
paint finish, wiper blades or
washer system.
Windshield washer fluid
contains methanol which is
poisonous.
uno_washer_fluid_title
uno_what_you_should_know
uno_reservoir_washer_fluid
Maintenance and care
178
To Next Page
Loading...
