• keep the lamps on for up to
three minutes after the key is
turned to OFF
Setting autolamp
1. Make sure that the headlamp
control is in the Off position.
Leaving the headlamp control on
will override the autolamp.
2. Turn the ignition to the ON
position or start the vehicle.
3. Slide the delay control all the
way to the left.
4. Press the ON/OFF control. The
lamp indicator will glow.
5. The autolamp automatically
turns the lamps on and off. The
indicator light will illuminate when
the headlamps turn on.
OFF
AUTO
MIRROR
ON
DIM
ON
AUTOLAMP
AUTO
MIRROR
ON
DIM
ON
AUTOLAMP
uno_auto-set
uno_auto_dim_mirror
Controls and features
48
To Next Page
Loading...
