against left (outboard) front edge
of seat track mounting bracket.
3. Use a screwdriver to screw
locator post into vehicle carpeting.
Exert pressure while turning to
pierce the carpeting.
When installed properly, the
locator will not screw down tightly,
but will rotate freely.
Usage
1. To remove mat, pull up on rear
of mat to release from locator post.
2. To re-install mat, align grommet
in mat over the locator post and
snap mat into place.
TRUNK MOUNTED CONTROLS
Spare tire and jack
Your vehicle is equipped with
either a temporary spare tire and
jack or a full-size spare tire located
under the rear of the vehicle. For
instructions on how to remove and
mount the spare tire, refer to the
Roadside emergencies chapter.
uno_remove-mat
uno_trunk_title
uno_spare_tire
uno_cargo_shade_intro
Controls and features
63
To Next Page
Loading...
