Ford Explorer 1997 - Page 71

Pressing UNLOCK once will:
• unlock the driver’s door and
• move the seat to its
corresponding memory seat
position.
When your dealer programs new
transmitters, the order of
programming controls seat recall
as follows:
• First transmitter programmed
recalls seat position one
• Second transmitter programmed
recalls seat position two
• Third transmitter programmed
recalls seat position three
• Fourth transmitter programmed
recalls no seat position
You may change seat positions at
any time.
You can deactivate or reactivate
the remote memory seat feature:
1. Make sure the anti-theft system
(if equipped) is not armed or
triggered, ignition is off and all
doors and liftgate window are
closed.
2. Turn the ignition key from OFF
to ON.
3. Press the door power unlock on
the door switch three times.
4. Turn the ignition key from ON
to OFF.
LOCK
PANIC
UN
LOCK
Controls and features
71