• you shift through R (reverse)
• one second has elapsed after the
brake pedal is released.
The autolock feature repeats when:
• a door is opened and then all
doors are closed
• the brake pedal is released.
The autolock feature can be
disabled (or reenabled) by using
the keyless entry system:
1. Enter your permanent five-digit
entry code (not the user code you
may have set).
2. Within five seconds, press and
hold 7/8.
3. Within five more seconds, press
and release 3/4.
4. Release 7/8.
To reactivate the system, repeat
the system deactivating
instructions.
1 2
3
45678
9
0
Controls and features
77
To Next Page
Loading...
