Using safety restraints properly
Combination lap and shoulder
belts
Insert the tongue into the slot in
the buckle fasten.
Push the red release button and
remove the tongue from the slot to
unfasten.
The outboard safety restraints in
the vehicle are combination lap
and shoulder belts. The front and
rear seat passenger outboard
safety belts have two types of
locking modes.
Vehicle sensitive (emergency)
locking mode
The vehicle sensitive mode is the
normal retractor mode which locks
the belts in response to vehicle
movement. For example, if the
driver brakes suddenly, turns a
corner sharply or your vehicle
receives an impact of 8 km/h (5
mph) or more the combination
safety belts will lock to help
reduce the forward movement of
the driver and passengers.
The retractor can be made to lock
by pulling sharply on the belt.
uno_comb_lap_sh_belts
uno_man_lock_lap_sh_belt
uno_automatic_locking_mode
Seating and safety restraints
84
To Next Page
Loading...
