Canceling automatic locking
mode
Disconnect the combination lap
and shoulder belt and allow it to
completely retract. This will cancel
the automatic locking mode and
activate the vehicle sensitive
(emergency) locking mode.
Front seat safety belt height
adjustment
Adjust the height of the shoulder
belt so that the belt rests across
the middle of your shoulder.
To lower the height of the shoulder
belt:
• Push the button down.
• Slide down.
To raise the height of the shoulder
belt:
• Slide up.
• Pull down on the height adjuster
to make sure that it is locked in
place.
uno_front_sbelt_height_adjust
uno_lap_belts
Seating and safety restraints
86
To Next Page
Loading...
