Condition Potential Causes
Cannot clear MyKey威 • Key in the ignition is a MyKey威 .
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威
section.
• Vehicle has been started using a
non Ford-approved remote start
system that is programmed as
MyKey威. Refer to Using MyKey威 with
remote start systems section.
Lost the only admin key • Purchase a new key from your
authorized dealer.
Lost any key • For programming spare keys, refer
to the Programming spare keys
section in this chapter.
I accidentally programmed all
keys as MyKeys威
• Vehicle has a non Ford-approved
remote start system that is recognized
as an admin key. Refer to the Using
MyKey威 with remote start systems
section to reset all MyKeys威 as admin
keys.
No MyKey威 function • An admin intelligent access key is
present at a push-and-start vehicle.
• No MyKeys威 are programmed to the
vehicle. Refer to Create a MyKey威
section.
• Vehicle has been started using a
non Ford-approved remote start
system (as an admin key) then a
MyKey威 is inserted without restarting
the engine.
Locks and Security
132
2012 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
To Next Page
Loading...
