Ford F-150 2015 - Module Wrap Up

Module�2�-�AluminumTextbook
2015�Ford�F-150�Structural�Repair�Training�Course�(FOR06) 31
To�prevent�galvanic�corrosion:
• seal�the�area�with�a�protective
coating.
• use�nonconductive�spacers�or
grommets.
• install�protective�coating�fasteners.
• apply�nonconductive�adhesive.
Module�Wrap�Up
Topics�discussed�in�this�module
included:
• safe�work�practices�when�working
with�aluminum.
• the�characteristics�of�a�stamping.
• extrusions�and�their�repairability.
• castings�and�their�use.
• what�the�Ford�heating�limits�are�for
straightening.
• the�prevention�of�galvanic
corrosion.