VIEW OPERATION
Use the buttons below to select the best view for backing up your vehicle and trailer. You can use these views for Pro Trailer Backup Assist or Trailer
Reverse Guidance.
You can select the following views by selecting the rear camera icon
on the touchscreen. The view drawer displays. (View drawer shown.)
*IF EQUIPPED
360 degree camera*: shows the rear camera view on the le side of the screen and the 360 degree view on the right side of the screen.
Rear view camera: shows your trailer hitch or what is directly behind your vehicle.
Rear split view camera*: shows a 180 degree view of area behind your vehicle.
Bed camera*: shows the truck bed.
Trailer AUX camera*: shows a rear view camera image of what is behind your trailer.
This camera needs to be purchased and installed separately.
Picture-in-picture view*: shows a main view and a secondary view when in bed camera view or trailer AUX camera view.
Trailer Reverse Guidance view*: shows you a view of the sides of your vehicle and your trailer.
In auto mode, this view moves as your trailer moves so that you do not have to adjust the camera as you turn.
You can use the le and right arrows to see more of the driver or passenger side. Press Auto to return to automatic
camera adjustments.
Takes you back to the 360 degree camera system and out of the Trailer Reverse Guidance feature.
HITCH ANGLE GRAPHIC
The hitch angle graphic shows you a small, top-view representation of your vehicle and trailer.
This representation shows two dierent-colored lines:
• • A black line shows you where your trailer is in relation to your vehicle.
• • For Pro Trailer Backup Assist, the white line represents the amount the trailer turns based on knob input.
• • For Trailer Reverse Guidance, the white line represents the amount the trailer turns based on steering
wheel position.
This graphic can be seen in the normal rear view, bed camera, trailer AUX camera and Trailer Reverse
Guidance camera views.
15
16
To Next Page
Loading...
