PRO TRAILER BACKUP ASSIST WITH TRAILER
REVERSE GUIDANCE STICKER PLACEMENT
PLACEMENT TIPS
•• Perform sticker placement when temperatures are above 32°F (0°C).
•• Clean the trailer.
•• Place the sticker:
– On a flat, dry, horizontal surface.
– Entire sticker must be visible to the camera located in the tailgate handle.
– Within the green zone as shown below, between 4 in (10 cm) and 19 in (48 cm) from the trailer
ball hitch.
– Lengthwise on the trailer tongue.
•• Once the sticker is in place, confirm that the sticker is visible using the touchscreen.
Scan the QR code for additional information about your vehicle.
WARNING: Once placed, the sticker cannot be moved. Do not attempt to reuse stickers if removed.
PL3J 19G217 RA
ford.ca
owner.ford.com
19 in
48 cm
4 in
10 cm
4 in / 10 cm
19 in / 48 cm
A-Frame Trailer Tongue Straight Trailer Tongue
Top Views
Yes
No
To Next Page
Loading...
