Select Add Trailer on the touchscreen.
Press the center button on the knob located to the right of the steering wheel to begin setting
up the system.
FEATURE SETUP
Use the keyboard on the touchscreen to enter the trailer name, then press the return button to confirm.
SET UP THE SYSTEM
The system only works with conventional trailers.
It does not work with other types, including fih-
wheel and gooseneck. Use the images to the right
to help you determine your trailer type.
CONVENTIONAL
TRAILER EXAMPLES
NON-CONVENTIONAL
TRAILER EXAMPLES
The functionality of Pro Trailer Backup Assist with
Trailer Reverse Guidance is not available for fih
wheel and gooseneck type trailers.
SELECT THE TRAILER TYPE
Note: The system is designed to work with trailers
that have a hitch point to center of axle or axles
measurement of 6-33 (1.85-10.05 m). The system
is designed to work with drawbars that have a
license plate to hitch ball center measurement of
9-18 in (23-46 cm) when installed.
3
4
To Next Page
Loading...
