After the head restraint reaches the
forward-most tilt position, pivot it forward
again to release it to the rearward, untilted
position.
Note: Do not attempt to force the head
restraint backward after it is tilted. Instead,
continue tilting it forward until the head
restraint releases to the upright position.
REMOVING THE HEAD RESTRAINT
1. Pull up the head restraint until it
reaches its highest position.
2. Press and hold the adjust and release
button and the unlock and remove
button.
3. Pull up the head restraint.
Note: You cannot remove head restraints
that have audio system speakers.
INSTALLING THE HEAD
RESTRAINT
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
MOVING THE SEAT BACKWARD
AND FORWARD
If the seat stops prior to reaching the end
of the travel position, or an obstruction
occurs, a new stopping position is learned.
To reset the stopping position:
1. Remove any obstruction.
2. Press and hold the control until the
seat stops moving.
3. Press and hold the control again until
the seat stops.
4. Continue holding the control for a few
seconds. The new position is learned.
ADJUSTING THE SEAT CUSHION
(If Equipped)
ADJUSTING THE SEAT BACKREST
Max Recline Seat
WARNING: Always drive and ride
with your seatback upright and the lap
belt snug and low across the hips.
197
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Front Seats