Ford F-150 2023 - Page 529

CHANGING A REVERSING LAMP
BULB
E358899
A
B
C
Turn signal bulb.A
Reversing lamp bulb.B
Rear and stop lamp bulb.C
1. Remove the rear lamp assembly. See
Removing a Rear Lamp Assembly
(page 519).
2. Rotate the bulb socket
counterclockwise and remove it from
the rear lamp assembly.
3. To install, reverse the removal
procedure.
CHANGING A HIGH MOUNTED
STOPLAMP BULB
1. Make sure the lamps are off.
2. Remove the four screws and move the
lamp assembly away from the vehicle
to expose the bulb sockets.
E187290
3. Remove the bulb socket by rotating it
counterclockwise and pulling it out of
the lamp assembly.
4. Pull the bulb straight out of the socket.
5. To install, reverse the removal
procedure.
CHANGING A LICENSE PLATE
LAMP BULB
The license plate bulbs are behind the rear
bumper.
E187794
1. Reach behind the rear bumper to
locate the bulb.
2. Twist the bulb socket counterclockwise
and carefully pull to remove it from the
lamp assembly.
3. Pull the bulb straight out of the socket.
525
2023 F-150 (TFD) Canada/United States of America, enUSA, Edition date: 202206, DOM
Maintenance