COMFORT
HEATED AND VENTILATED FRONT SEATS*
The vehicle must be running
to use these features.
To operate the heated
feature, press
repeatedly
to cycle through the various
settings and o.
To operate the ventilated
feature, press
repeatedly
to cycle through the various
settings and o.
When you switch on the auto climate control setting, the heated seats
switch on to the current climate setting.
PERSONAL PROFILES*
You can create multiple personal profiles for each driver to personalize the
vehicle’s settings. You can create one profile for each preset memory seat
button along with a guest profile. A profile can be recalled using
the touchscreen, the selected preset button, a linked remote control or
mobile device.
Use the touchscreen to create a personal profile.
1. Switch the ignition on and make sure the vehicle is in park (P).
2. Select the Personal Profiles button under Settings, press Add Profile
and follow the instructions provided on the screen.
You can save preset memory positions for up to three remote controls by
assigning a remote control to a personal profile using the touchscreen.
MEMORY FUNCTION*
The memory function allows a one-touch recall of personalized memory
features, including the driver seat, power mirrors, adjustable pedals* and
power steering column*. Use the memory controls on the driver door to
program and then recall memory positions. To program a position, switch
the ignition on. Adjust the memory features to your desired positions.
Press and hold the desired preset button until you hear a single tone. A
confirmation message appears in the instrument cluster display. You can
now use these controls to recall the set memory positions. You can also
program your memory seat to your transmitter. That way, when you unlock
your door with the transmitter, your memory features automatically move
into your saved positions.
See the Memory Function chapter in your Owner’s Manual for more details.
ADJUSTING THE FRONT SEAT FLAT*
This feature allows the occupant to find a comfortable position to rest when
the vehicle is not moving.
You can use the recline control to move the front seats into a flat position.
Before doing so, make sure the rear seat cushion is in the upright position
and remove any objects that may obstruct the movement of the flat seat.
3
To Next Page
Loading...
