WHAT IS ONE PEDAL DRIVE
One pedal drive allows you to accelerate
and brake using only the accelerator pedal.
Pressing the accelerator down accelerates
your vehicle, releasing pressure on the
accelerator with your foot still on the pedal
slows down your vehicle and releasing the
pedal completely allows your vehicle to
come to a complete stop.
ONE PEDAL DRIVE
PRECAUTIONS
WARNING: This system is an extra
driving aid. It does not replace your
attention and judgment, or the need to
apply the brakes. This system does NOT
automatically brake your vehicle. If you
fail to press the brake pedal when
necessary, you may collide with another
vehicle.
Shifting into neutral (N) does not hold your
vehicle at a standstill.
Shifting into drive (D) or reverse (R) does
not cause the vehicle to move if the
accelerator pedal is not pressed.
Note: Always check the transmission
selection before accelerating.
ONE PEDAL DRIVE
LIMITATIONS
One pedal drive is unavailable when any
of the following occur:
• A drive mode other than normal or
sport is selected.
• Cruise control is active.
• Stability control is turned off.
• Trailer hitch assist is active.
• Active park assist is active.
• Remote park assist is active.
• Gear lever is in an incorrect
transmission position, such as park (P)
while driving.
Releasing the accelerator pedal may not
bring your vehicle to a complete stop on
steep grades.
Increased vehicle load or towing a trailer
may reduce accelerator pedal ability to
slow the vehicle.
SWITCHING ONE PEDAL DRIVE
ON AND OFF - VEHICLES WITH:
12.3 INCH SCREEN
1. Press Features on the touchscreen
2. Press DRIVE MODES.
3. Switch 1-Pedal Drive on or off.
SWITCHING ONE PEDAL DRIVE
ON AND OFF - VEHICLES WITH:
15 INCH SCREEN
1. Access the vehicle drawer on the
touchscreen.
2. Press CONTROLS.
3. Press Drive Modes.
4. Switch 1-Pedal Drive on or off.
ONE PEDAL DRIVE
INDICATORS
To Next Page
Loading...
