Ford FIESTA 2014 - MyKey (If Equipped); Principle of Operation; Standard Settings; Optional Settings

Remote Control Without a Folding
Key Blade
E87964
2
1
1
1. Press and hold the buttons on the
edges to release the cover. Carefully
remove the cover.
2. Remove the key blade.
E105362
3
3. Twist the screwdriver in the position
shown to start separating the two
halves of the remote control.
E119190
4
4. Twist the screwdriver in the position
shown to separate the two halves of
the remote control.
E125860
5
Note: Do not touch the battery contacts or
the printed circuit board with the
screwdriver.
5. Carefully remove the battery with the
screwdriver.
6. Install a new battery (3V CR 2032) with
the + facing downwards.
7. Assemble the two halves of the remote
control.
8. Install the key blade.
28
Fiesta (CC3) Vehicles Built From: 14-07-2014, Australia, enAUS
Keys and Remote Controls