Note:
The brake and the clutch systems
are supplied from the same reservoir.
Top up with fluid that meets the Ford
specification. See Technical
specifications (page 128).
TECHNICAL SPECIFICATIONS
Vehicle fluids
SpecificationRecommended fluidItem
WSS-M2C913-B
Ford or Motorcraft
Formula E SAE 5W-30
Engine Oil
*
Engine oil
WSS-M97B44-D
Motorcraft SuperPlus Anti-
freeze
Coolant
ESD-M6C57-A
Ford or Motorcraft Super
DOT 4 Brake Fluid
Brake fluid
*
You can use an alternative SAE 5W-30 engine oil, providing it meets the specification
defined by WSS-M2C913-B.
Note:
If you operate your vehicle in temperatures below -20°C (-4°F), you must not
use SAE 10W-40 engine oil.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-B, you must use SAE 5W-30 (preferred), SAE 5W-40 (except
vehicles with E85 fuel) or SAE 10W-40 that meets the specification defined by either
ACEA A1/B1 (preferred) or ACEA A3/B3. Using these oils can result in longer engine
cranking periods, reduced engine performance, reduced fuel economy and increased
emission levels.
Capacities
Capacity in litres (gallons)ItemVariant
2.5 (0.6)
Windscreen and rear
window washer system
All
3.8 (0.8)
Engine lubrication system -
including the oil filter
1.25L Duratec-16V (Sigma)-
60PS-Manual
3.5 (0.8)
Engine lubrication system -
excluding the oil filter
1.25L Duratec-16V (Sigma)-
60PS-Manual
5.5 (1.2)Engine cooling system
1.25L Duratec-16V (Sigma)-
60PS-Manual
128
Maintenance
To Next Page
Loading...
