ADJUSTING THE
WINDSCREEN WASHER
JETS
The eye ball jets can be adjusted precisely
using a pin.
CHECKING THE WIPER
BLADES
Run the tip of your fingers over the edge
of the blade to check for roughness.
Clean the wiper blade lips with water
applied with a soft sponge.
CHANGING THE WIPER
BLADES
Windscreen wiper blades
1. Press the locking button.
2. Remove the wiper blade.
Note:
Make sure that the wiper blade
locks into place.
3. Install in the reverse order.
Rear window wiper blade
1. Lift the wiper arm.
2. Position the wiper blade at right angles
to the wiper arm.
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
42
Wipers and washers