Ford FIESTA - Creating a Mykey; Programming a Mykey

The following settings can be configured
using an admin key:
• Various vehicle speed limits can be set.
Warnings will be shown in the display
followed by an audible tone when your
vehicle reaches the set speed. You
cannot override the set speed by fully
depressing the accelerator pedal.
• Various vehicle speed reminders can be
set. Warnings will be shown in the
display followed by an audible tone
when the set vehicle speed is exceeded.
• Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Automatic volume
control will be disabled.
• Always on setting. When this is selected
you will not be able to disable
emergency assistance or the do not
disturb feature.
Vehicles with Keyless Entry
If a MyKey and an admin key are present,
your vehicle will recognize the admin key
only.
CREATING A MYKEY
Vehicles without Keyless Starting
1. Insert the key you want to program into
the ignition.
2. Switch the ignition on.
3. Access the main menu using the
information display. Select MyKey and
press OK or the right arrow button.
4. Select Create MyKey and press OK.
5. When prompted, press and hold OK
until you see a message informing you
to label this key as a MyKey. The key will
be restricted the next time you use it.
Note: Make sure you label the MyKey so you
can distinguish it from the admin keys.
Vehicles with Keyless Starting
1. Switch the ignition on using an admin
key.
2. Access the main menu using the
information display. Select MyKey and
press OK or the right arrow button.
3. Hold the key you want to program next
to the steering column exactly as
shown.
4. Select Create MyKey and press OK.
5. When prompted, press and hold OK
until you see a message informing you
to label this key as a MyKey. The key will
be restricted the next time you use it.
Note: Make sure you label the MyKey so you
can distinguish it from the admin keys.
PROGRAMMING A MYKEY
Optional Settings
1. Switch the ignition on using an admin
key.
2. Access the main menu using the
information display. Select MyKey and
press OK or the right arrow button.
3. Use the arrow buttons to scroll to an
optional feature.
4. Press OK or the right arrow button to
scroll through the settings.
5. Press OK or the right arrow button to
make a selection.
4
Fiesta (CCN) , CG3583en enGBR, Edition date: 02/2014, None