CLEARING ALL MYKEYS
Note: Clearing all MyKeys will return the
admin key to its default setting and reset the
Mykey distance to zero.
1. Switch the ignition on using an admin
key.
2. Access the main menu using the
information display. Select MyKey and
press OK or the right arrow button.
3. Scroll to Clear All and press OK.
4. Press and hold OK until you see a
message informing you that all MyKeys
have been cleared.
CHECKING MYKEY SYSTEM
STATUS
You can find information about your
programmed MyKeys by using the
information display.
MyKey Distance
Tracks the distance when drivers use a
MyKey. The only way to delete the
accumulated distance is by using an admin
key to clear your MyKey. If the distance does
not accumulate as expected, then the
intended user is not using the MyKey, or an
admin key user recently cleared and then
recreated a MyKey.
Number of MyKeys
Indicates the number of MyKeys
programmed to your vehicle. Use this
feature to detect how many MyKeys you
have for your vehicle and determine when
a MyKey has been deleted.
Number of Admin Keys
Indicates how many admin keys are
programmed to your vehicle. Use this
feature to determine how many admin keys
you have for your vehicle, and detect if an
additional MyKey has been programmed.
USING MYKEY WITH REMOTE
START SYSTEMS
MyKey is not compatible with non
Ford-approved, aftermarket remote start
systems. If you choose to install a remote
start system, see an authorized dealer for
a Ford-approved remote start system.
5
Fiesta (CCN) , CG3583en enGBR, Edition date: 02/2014, None
To Next Page
Loading...
