Press the button to scroll through the
displays:
• Odometer.
• Trip odometer.
• Distance to Empty.
• Average fuel economy.
• Instantaneous fuel economy.
• Average speed.
• Outside air temperature.
• Gear shift indicator.
You can reset the trip odometer, average
fuel economy and average speed. To do
this, scroll to the required display, then
press and hold the button until the screen
appears completely full with dashes.
The trip computer includes the following
information displays:
Odometer
Registers the total distance of the vehicle.
Trip Odometer
Registers the distance traveled since the
function was last reset.
Distance to Empty (If Equipped)
Indicates the approximate distance your
vehicle will travel on the fuel remaining in
the tank. Changes in driving pattern may
cause the value to vary.
Average Fuel Economy (If Equipped)
Indicates the average fuel economy since
the function was last reset.
Instantaneous Fuel Economy (If
Equipped)
Indicates the current fuel economy.
Average Speed (If Equipped)
Indicates the average speed calculated
since the function was last reset.
Outside Ambient Temperature
Indication (If Equipped)
This will display the outside ambient
temperature in degrees Celsius.
Shift Indicator (If Equipped)
Indicates when to shift gear up to drive
more economically.
Enabling and Disabling the Shift
Indicator
1. Press the TRIP button until ECONO
displays on the screen.
2. Press and hold it for more than two
seconds until ECONO ON displays to
enable it.
3. Press and hold it for more than two
seconds until ECONO OFF displays to
disable it.
After enabling the shift indicator, the
indicator light illuminates for 3 seconds.
PERSONALIZED SETTINGS
Measure Units
To swap between imperial and metric
units, scroll to this display and press the
OK button.
59
Figo (CDU) , E4B5 19A321 ZCA enIND, Edition date: 06/2015, Second Printing
Information Displays
To Next Page
Loading...
