WARNINGS
Never place anything between the
jack and the ground, or the jack and
the vehicle.
Note: Vehicles with a tyre repair kit or run
flat tyres are not equipped with a vehicle
jack or a wheel brace.
It is recommended to use a workshop type
hydraulic jack for changing between
summer and winter tyres.
Note: Use a jack with a minimum lifting
capacity of 1.5 tonnes and a lifting plate with
a minimum diameter of 80 millimetres (3.1
inches).
The jack and wheel brace are located in
the spare wheel well. The jack handle is
clipped in to the jack.
Jacking and lifting points
CAUTION
Use only the specified jacking points.
If you use other positions, you may
damage the body, steering,
suspension, engine, braking system or the
fuel lines.
Note: The jacking points for the vehicle jack
and maintenance jack are the same.
93
Wheels and Tyres
To Next Page
Loading...
