COMPONENT LOCATION / DESCRIPTION FUNCTION
1 High-Voltage • Orange rectangle with a molded Provides means to disconnect
Service Disconnect plastic handle, about 100 mm high-voltage battery for safely
(4 in) in length. servicing vehicle.
2 High-Voltage Battery • Located behind the rear Provides high-voltage storage
275 Volts seatback. (275 V) for vehicle propulsion
requiremen
ts.
• Sealed nickel-metal hydride.
3 High-Voltage Wiring • Runs along the vehicle’s Provides physical path for
floorpan from the high-voltage high-voltage circuitry.
battery to the Electronically
Controlled Continuously
Variable Transaxle (eCVT),
to DC-to-DC converter, then the
electric A/C unit.
• All high-voltage wiring has
orange-colored insulation.
4 12-Volt Battery • Located under the hood on Provides 12-volt power for
driver side of the vehicle. vehicle accessories.
• Typical automotive 6-cell
lead/acid design.
5 Electronically • Transverse-mounted design Provides delivery of power to
Controlled similar to the non-Hybrid wheels for vehicle propulsion,
Continuously Fusion/Milan vehicles. generates electricity to re-
Variable Transaxle charge the batteries during
(eCVT) • Contains the traction motor, operation and contains
generator motor and hybrid certain hybrid electronics.
electronics.
6 DC/DC Converter • Located under the hood on Provides 12 volts of power to
the passenger side forward charge the 12-volt battery and
of the strut tower. run vehicle accessories.
7 Electric A/C • Located in the front of Provides electric A/C
Compresso
r the engine.
operation. Replaces the
belt driven A/C compressor.
FCS-14265-10
8
2010 Fusion Hybrid, Milan Hybrid Emergency Response Guide, 02/2009
To Next Page
Loading...
