2-8 Electrical
Section 2: Electrical
5. Rotate the handle upward.
6. Pull the service disconnect out and away from the HVTB. Make sure to store the service
disconnect in a place where it cannot be accidentally re-installed while the vehicle is being
serviced.
7. Wait 5 minutes after the service disconnect has been removed before continuing service. This
allows any residual voltage in the high-voltage system to dissipate.
8. To repower the system, reverse the depowering procedure.
2012 Fusion Hybrid, MKZ Hybrid Modifiers Guide, 09/2011
To Next Page
Loading...
