Intelligent Access
*
NOTE Your intelligent access transmitter must be within
3 feet (1 meter) of the vehicle for intelligent access to
function properly.
This system operates the power locks.
To unlock a door, pull the exterior door handle. Make sure not to
touch the lock sensor on top of the handle. To unlock and open the
luggage compartment, press the exterior release button hidden
above the license plate.
To lock the doors, touch the lock sensor on top of the door handle.
The transmitter also contains a mechanical key blade to unlock the
driver’s door, if necessary.
NOTE You must have a valid transmitter inside the vehicle to
switch on the ignition and start the engine.
Memory Function
*
Use the memory controls located on the driver’s door to program
and then recall memory positions. Move the seats and mirrors to the
desired positions. To program up to 3 positions, press and hold the
desired pre-set button until you hear a single tone. You can now use
these controls to recall the set positions.
You can also program your memory seats to your transmitter. That
way, when you unlock your door with the transmitter, your memory
features automatically move into your saved position. See the Seats
chapter in your Owner’s Manual for more details.
Remote Start
*
Remote start allows you to start the engine from outside your
vehicle using your remote transmitter.
To start, press
and then press twice within three seconds.
Once inside, apply the brake while pressing the START STOP
button. Shi into drive (D) and go.
If you have the integrated keyhead transmitter, insert the key into
the ignition and switch on the ignition as you normally would before
driving. To switch o the engine from outside the vehicle aer using
your remote start, press
once.
COMFORT
*if equipped
1852857_16a_Fusion_Hybrid_QRG_020415.indd 14 2/4/15 1:52 PM
To Next Page
Loading...
