Installing the Head Restraint
Align the steel stems into the guide sleeves
and push the head restraint down until in
locks.
Tilting Head Restraints (If Equipped)
The front head restraints tilt for extra
comfort. To tilt the head restraint, do the
following:
1. Adjust the seatback to an upright
driving or riding position.
2. Pivot the head restraint forward toward
your head to the desired position.
After the head restraint reaches the
forward-most tilt position, pivoting it
forward again will then release it to the
rearward, un-tilted position.
REAR SEATS
Note: You cannot lower the rear seat
backrest.
Stow the seatbelt in the stowage clip. This
prevents the seatbelt from getting caught
in the seat latch.
17
Police Responder Hybrid Sedan / Special Service Plug-In Hybrid Sedan (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV)/Police, Canada/United States of
America, enUSA, Edition date: 201905, First-Printing
Seats
To Next Page
Loading...
