EasyManua.ls Logo

Ford Fusion Hybrid 2020 - Low Gear and Interlock Override

Ford Fusion Hybrid 2020
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Grade assist:
Provides additional grade braking with
a combination of engine motoring and
high-voltage battery charging to help
maintain vehicle speed when
descending a grade.
As your vehicle determines the amount
of engine motoring and high-voltage
battery charging, you may notice the
engine speed increasing and
decreasing to help maintain your
vehicle speed when descending a
grade.
The grade assist lamp in the instrument
cluster is illuminated.
Low (L)
Provides maximum engine braking.
The transmission may be shifted into
low (L) at any vehicle speed.
Is not intended for use under extended
or normal driving conditions and results
in lower fuel economy.
Brake-Shift Interlock Override
WARNING: When doing this
procedure, you need to take the
transmission out of park (P) which
means your vehicle can roll freely. To
avoid unwanted vehicle movement,
always fully apply the parking brake prior
to doing this procedure. Use wheels
chocks if appropriate.
WARNING: If the parking brake is
fully released, but the brake warning
lamp remains illuminated, the brakes
may not be working properly. Have your
vehicle checked as soon as possible.
Note: Do not drive your vehicle until you
verify that the brake lamps are working.
Note: See your authorized dealer as soon
as possible if this procedure is used.
Note: For some markets this feature is
disabled.
Note: This feature only functions if your
12-volt battery has power. If vehicle battery
voltage is not sufficient, an external 12-volt
power source such as jumper cables, battery
charger or jump pack, may be required to
function the interlock override switch.
Use the brake-shift interlock override to
move your transmission from the park
position in the event of an electrical
malfunction. If your vehicle has a dead
battery, an external power source is
required.
1. Apply the parking brake and switch
your ignition off before performing this
procedure.
2. Locate your brake-shift interlock
access slot. The slot is on the left side
of the transmission selector. The
access slot does not have a label.
Note: Make sure that you correctly identify
the access hole as not to damage the dash.
3. Using a screwdriver, press and hold the
brake shift interlock switch. The
transmission selector indicator flashes
for three seconds when your vehicle is
in override mode.
22
Police Responder Hybrid Sedan / Special Service Plug-In Hybrid Sedan (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV)/Police, Canada/United States of
America, enUSA, Edition date: 201905, First-Printing
Transmission

Related product manuals