Ford FUSION - DUAL ZONE AUTOMATIC TEMPERATURE CONTROL (NAVIGATION BASED - IF EQUIPPED)

2. Remove the cover.
3. Disconnect the electrical
connector.
4. Release the clip and remove the
bulb.
Side lamps
1. Remove the headlamp. See
Removing a headlamp (page
46).
E91018
2. Remove the cover.
3. Carefully prise out the bulb holder.
4. Remove the bulb.
Front direction indicators
1. Remove the headlamp. See
Removing a headlamp (page
46).
E91016
2. Turn the bulb holder anticlockwise
and remove it.
3. Gently press the bulb into the bulb
holder, turn it anticlockwise and
remove it.
Side repeaters
2
1
3
E78869
1. Carefully remove the side
repeater.
2. Hold the bulb holder, turn the
housing anticlockwise and
remove it.
3. Remove the bulb.
48
Lighting