Ford GALAXY - Creating a Level Load Floor

1. To recline the seatback, pull the
strap and lean back against the
seatback until it reaches the
desired position.
2. To raise the seatback, pull the
strap and let the seatback return
to the upright position.
Folding the seats flat
WARNING
When folding the seatbacks
down, take care not to get your
fingers caught between the seatback
and seat frame.
Note: On Galaxy, you can release
the third row seat belts from the floor
lugs. See Fastening the seat
belts (page 30).
E72707
1
1
E72648
A
B
3
2
1. Pull the loop at the rear of the seat
cushion and fold the seat cushion
forwards until it lies flat on the floor
(1).
2.
Grasp the grip (A) and pull the
loop (B) at the base of the
seatback upwards and rearwards
(2).
3. Fold the seatback down flat to the
floor using the grip (3).
4. To return the seat to the seating
position, grasp the grip and pull
the seatback upwards and then
rearwards.
5. Fold the seat cushion back.
Creating a level load floor
CAUTION
When transporting a load with
the seats folded flat, always fold
the relevant carpeted cover forwards
to cover the folded seats.
133
Seats