1. Press the right arrow button on
the steering wheel to enter the
main menu.
2.
Highlight Setup with the up and
down arrow buttons and press
the right arrow button.
3.
Highlight Alarm and press the
right arrow button.
4.
Highlight Reduced or Full
guard. If you prefer to be asked
each time you switch off the
ignition, select Ask on Exit.
5.
Press the OK button to confirm
the selection.
6. Press the left arrow button to exit
the menu. To return to the trip
computer display directly, hold the
left arrow button pressed.
Information messages
See Information messages
(page 101).
ARMING THE ALARM
All vehicles
To arm the alarm, lock the vehicle
with the key or remote control.
DISARMING THE ALARM
Perimeter alarm
Disarm and silence the alarm by
unlocking the doors with the key,
switching the ignition on with a
correctly coded key or unlocking the
doors with the remote control. See
Locking and unlocking (page
38).
Category one alarm
Disarm and silence the alarm by
unlocking the doors with the key in
the driver’s door and switching the
ignition on with a correctly coded key
within 12 seconds or unlocking the
doors with the remote control. See
Locking and unlocking (page
38).
46
Alarm